PS Audio - DirectStream DAC - Digital to Analogue Converter
Class A+ Stereophile rated DirectStream DAC converts any digital input format, such as PCM or DSD to a pure DSD stream and outputs near-perfect analog directly to your power amplifier or preamplifier. Whatever the format, whatever the sample rate, DirectStream is a pure DSD based solution that fulfills the promise of a high-resolution analog performance standard the originators of CDs promised over 30 years ago. Hear what’s been missing in your music for all these years. If you know the sound of music and instruments, and want to hear what’s been missing on your discs, then this DAC is right for you.
Now, full MQA, Tidal (including Masters), Spotify, VTuner, Qobuz, and Roon ready when you have the Bridge II installed.
- Pure 100% DSD based D to A Converter
- Fully upgradable through software releases
- Resolution perfect volume and balance controls built in
- Upsamples PCM and DSD to 20x DSD rate
- DXD support
- Purely passive transformer coupled output
- Improves imaging and soundstage
- Simple, direct signal path with one master clock
- Hand written filters, processors and upsamplers
- Immune to incoming jitter problems from different sources
- Increased digital headroom
- No off-the-shelf IC DAC chips used
- Uncovers musical details masked by typical PCM based processors
- 7 digital inputs
- MQA and Tidal ready with optional Bridge II
- Fully balanced from input to output
- Colour touch screen
Pure 100% single bit DSD based D to A Converter
Most of today’s sophisticated DACs are IC based instruments using off-the-shelf-chips that are Multi-bit Sigma-Delta based designs. While these are relatively simple to design and produce, they don’t often give the best results sonically. Because they are one-chip systems compromises are made in their architecture that found in DirectStream’s custom based architecture. DirectStream takes both PCM and DSD, upsamples the data and converts to single-bit DSD and then outputs pure music regardless of input format for the data. The results of this design can be heard in increased musical information presented to the listener at every opportunity.
Purely passive output stage
Most modern DACs use some form of active tube or solid state output stage to amplify, filter and drive the DACs output. DirectStream takes a different approach: passive. In one of the simplest, elegant and musically correct executions of an output stage, high-speed class A video amplifiers are used as the final switch for the single-bit, double DSD output of DirectStream; feeding a high-performance passive audio output transformer. The transformer is specially designed to act as both the galvanic isolation between the DAC and the outside world as well as the primary low pass filter required to present a perfect, low distortion, low noise output signal. When you listen to DirectStream you never are accosted by added bright, hard glare in the music as happens with many active designs. Instead, clean, pure music flows from the DirectStream directly to your preamplifier or power amplifier.
Resolution perfect volume and balance controls
Designer Smith perfected a 100% bit-perfect volume and balance control that’s built into DirectStream, enabling users to control the output level when feeding directly into a power amplifier or preamplifier. That the volume control is completely bit-perfect means there is no loss of resolution for any volume setting, a feature unique amongst the majority of DACS in the world today. The ability to eliminate the preamplifier in the system without any resolution loss is a major benefit to DirectStream’s outstanding musical performance.
Simple, direct signal path with only one master clock
Typical high-end DAC designs use more than one master clock as you can see in the drawing we provided on the Overview page. There are often separate clocks for USB, Audio and others, causing major headaches for system designers trying to synchronize the clocks. DirectStream obviates the problem by basing the entire design on one master clock of extraordinarily high quality. Used is a low phase noise, low jitter clock designed for DirectStream by Crystek. Using this advanced approach the need for synchronization is eliminated, jitter levels are reduced and music is delivered with a clarity rarely heard.
Immunity to jitter from sources
Sources have always had a major impact on sound quality with DACS. Transports, computers, CD players, cables all make a significant impact on performance into a typical DAC. This problem has been significantly reduced with DirectStream. Now, for perhaps the first time, sources of just about any quality and jitter level sound nearly identical. For example, you can take a cheap $30 DVD or CD player’s digital output, connect with DirectStream and have sound quality unthinkable for such a poor source. Performance levels no longer are dependent on the quality of source or connections; certainly not to the degree they have been in the past. Yes, cables and sources still make a difference, but with DirectStream that difference is reduced to nearly background noise. Whatever you use to play or stream your music now sounds as good as it gets.
Asynchronous high-speed USB
DirectStream can match up to either a computer or a home network. If a network connection is desired, there’s is the optional Network Bridge available that slides right into the rear panel of DirectStream and adds an additional input. You can also connect directly to your computer via USB. USB communication, if handled properly, can have every sound quality advantage of a dedicated CD transport or Network Bridge. DirectStream provides a fully synchronous 24-bit 192kHz path for USB based audio. Using a good quality USB cable between DirectStream and your computer, like a quiet MAC Mini, provides an instant media server that can be controlled through any number of handheld devices like an iPod, iPhone or Android using a 3d party controller program. Your music can be managed by iTunes, Bit Perfect, Pure Music or Ammara for ease of use.
A handy feature on DirectStream is the polarity (phase) control. This touch screen option (available on the remote as well) allows users to select normal or inverted phase for every input and for every performance. Sources and music have no standard for absolute polarity, a fact easily demonstrated by switching polarities on the as the music plays. Many Audiophiles mark their discs in phase and out of phase and are very careful to select the proper phase before playing each disc. Some CD players and sources themselves invert phase so that a disc you believe is inverted actually is correct played on a specific device and incorrect on yet another. To fix this problem you can assign each input on DirectStream to switch to the proper polarity when you activate that input. Touching this control is the same thing as reversing the loudspeaker connections of both loudspeakers (+ to -) at either the amplifier or speakers. All live acoustic music is in absolute phase but some recordings may accidentally be made inverted and should sound more realistic and pleasant when you correct their phase with the switch.
Play directly into your power amplifier or preamplifier
DirectStream offers the ability to play directly into either your preamplifier or power amplifier through either its balanced or single-ended outputs. You can select the optimum gain setting through DirectStream’s setup menu to match your amplifier and loudspeaker’s sensitivity. If you choose to go through a preamplifier, it’s easy to set DirectStream at maximum level (or any level you wish) to match the preamp’s gain. But should you choose to eliminate the extra electronics of the preamplifier, DirectStream is more than capable of driving the power amplifier directly. DirectStream’s unique zero-loss volume control maintains full resolution bit-perfect performance at any volume setting from the lowest to the highest levels.
Hear more than you ever imagined from CDs
DirectStream converts everything to DSD, even PCM before delivering the music to your system. This approach, coupled with careful design, low jitter and a simple and direct signal path has the benefit of uncovering details buried in the music you may not have realized are even there. CDs come alive with subtle details that were never apparent with your older DAC; details you never knew even existed. CDs sound more like high resolution audio than you ever imagined, closing the gap between higher resolution PCM and DSD copies. No longer do you need to consider replacing your current CD library because once you hear what’s truly on your discs, you may not need to consider upgrading to a higher resolution copy at all. Yes, it is that obvious and significant.
- Unit Weight - 22 lbs [13.5 kg]
- Unit Dimensions - 14” x 17” x 4” [ 36cm x 43cm x 10cm]
- Shipping Weight - 31 lbs [19 kg]
- Shipping Dimensions - 20.5”x 24” x 10” [52cm x 61cm x 25cm]
- Input Power - Model specific 100VAC, 120VAC, or 230VAC 50 or 60Hz
- Power Consumption - 30W
Digtial audio inputs
- I2S(2), Coax, XLR Balanced, TOSLINK, USB, Network Bridge slot
Analog Audio Output
- Connector - RCA/XLR Unbalanced /Balanced (X2)
- Output level, low - 1.41 Vrms(+5BV)/3.15
- Output level high, maximum - 2.81 Vrms (+8dBV)/5.3 Vrms (+12dBV)
- Output Impedance - 100Ω/200Ω
- Frequency Response - 20-20KHz +/- 0.25dB
- THD+N @ 1KHz (full scale) - <0.03%
- Output Stage - Passive audio transformer, fed by high current, high speed analog amps producing double rate DSD.
- Format - PCM or DSD
- Sample rate (PCM) - 44.1kHz, 48.0kHz, 88.2kHz, 96.0kHz, 176.4kHz, 192kHz
- Word length (PCM) - 16b, 18b, 20b, 24b
- Data rate (DSD) - Standard (2.8MHz) or Double (5.6MHz) DoP on all inputs as well as raw DSD on I2S inputs
- Input jitter reduction - effectively 100%, residual immeasurable. No input PLLs, FLLs.
- Input Processing - 170MHz
- Signal Processing - 50MHz
- Synchronous Upsampling, all inputs - 28.224MHz
- Digital Processing S/N ration - >146 dB
- Digital Volume Control - Zero loss of precision
- Analog Conversion method - Delta Sigma (DSD) Single-bit double rate
I2S Digital Input
- Connector - HDMI
- Format - PCM or DSD. DoP on all inputs as well as raw DSD on I2S inputs
USB Digital Input
- Connector - USB “B” Type
- Format - PCM or DoP v1.1 (DSD over PCM)
- Transfer mode - Asynchronous