The Audio Tailor - The X's - Package
You Save: $8,020.00
The X's - Exceptional, Excellence, Exclusive and Expert
Included Premium Products
- Michi P5 - Preamplifier
- Michi M8 - Mono-Block Power Amplifiers (pair)
- Q Acoustics Concept 500 - Floorstanding Speakers
The Michi P5 Control Amplifier delivers the ultimate culmination of audio performance with a full complement of source inputs. The meticulous circuit design, critical component selection and over 3 years in the making ensures the P5 meets the highest of standards allowing this preamplifier to proudly wear the Michi logo.
The Michi M8 Monoblock Amplifier no-compromise Class AB amplifier delivers 1,080 watts into 8 ohms and an astounding 1,800 watts into 4 ohm loads. The design architecture ensures a smooth, accurate and relaxed delivery of the audio to even the most demanding loudspeakers while maintaining critical energy, rhythm and timing.
Founded in 2006, Q Acoustics quickly built a reputation for designing and manufacturing class-leading loudspeakers. Concept 500 is the culmination of Q Acoustics continual evolution and refinement resulting in what we believe is sonic perfection.
Designed to appeal to discerning audiophiles, the Concept 500 achieves a perfect balance between art and science. It is a loudspeaker that is at once, stylish, contemporary, fine-sounding and astonishingly accurate. It couples low directivity with wide bandwidth, good sensitivity and sensible impedance. This makes the new Concept 500 both room-friendly and an easy load to drive, allowing amplifiers to deliver their best performance.
To create a stereo soundstage which gives as good an impression of width, depth and height as that found in a live performance requires high quality drive units, a well designed crossover and an accurately constructed cabinet. To achieve this, Q Acoustics formed a truly talented team with many years of experience in the design, engineering and manufacture of world-class loudspeakers. A combination that resulted in a state-of-the-art loudspeaker worthy of any high-end system.
- Dimesions (W × H × D): 485 × 150 × 452mm / 19" × 6" × 17.75"
- Front Panel Height: 132mm (5.25")
- Power Requirements: 120V, 60Hz
- Power Consumption:40W
- Standby Power Consumption: Normal: <0.5W, Network Wakeup: <2W
- Net Weight: 22.9kg (50.5lbs.)
- BTU Rating (4Ω, 1/8th power): 87 BTU/h
- Total Harmonic Distortion (THD): (20Hz–20kHz) <0.002%
- Frequency Response: Line Level Inputs: 10Hz - 100kHz (±0.3dB), Digital Inputs: 20Hz - 20kHz (±0.3dB), Phono Input: 20Hz - 20kHz (±0.3dB)
- S/N Ratio (IHF "A" Weighted): Line Level Inputs: 116dB, Digital Inputs: 100dB, Phono Input: 80dB
- Intermodulation Distortion (60Hz:7kHz, 4:1): <0.002%
- Input Sensitivity: Line Level Inputs (RCA): 160mV, Line Level Inputs (XLR): 250mV, Phono Input (MM): 2.5mV, Phono Input (MC): 250uV, Digital Inputs: 0dBFs
- Input Impedance: Line Level Inputs (RCA): 47kΩ, Line Level Inputs (XLR): 100kΩ, Phono Input (MM): 47kΩ, Phono Input (MC): 47kΩ, Digital Inputs: 75Ω
- Input Overload: Line Level Inputs (RCA): 12V, Line Level Inputs (XLR): 12V, Phono Input (MM): 199mV, Phono Input (MC): 22mV
- Output Level: Unbalanced (RCA): 1V, Balanced (XLR): 2V
- Output Impedance: Unbalanced (RCA): 470Ω, Balanced (XLR): 100Ω
- Channel Separation: Line Level Inputs: >85dB, Phono Input: >55dB TONE CONTROLS: ±10dB at 100Hz / 10kHz
- Coax/Optical Digital Input Signals: LPCM (Up to 24-bit/192kHz) PC-USB: USB Audio Class 1 (up to 24/96), USB Audio Class 2 (up to 32/384)*Driver Installation Required, DSD and DoP Support, MQA Support
- Dimensions (W × H × D): 485 × 238 × 465mm / 19" × 9.375" × 18.25"
- Front Panel Height: 220mm (8.625")
- Power Requirements: 120V, 60Hz
- Power Consumption: 1200W
- Standby Power Consumption: Normal: <0.5WNetwork, Wakeup: <2W
- Net Weight: 59.1kg (130.3lbs.)
- BTU Rating (4Ω, 1/8th power): 3200 BTU/h
- Continuous Power Output: 1080W/Ch (8Ω), 1800W/Ch (4Ω)
- Total Harmonic Distortion (THD): <0.018%
- Frequency Response: 20Hz - 20kHz (+0dB, -0.15dB), 10Hz - 100kHz (+0dB, -0.5dB)
- Gain: Unbalanced (RCA): 34dB Balanced (XLR): 30dB
- Intermodulation Distortion (60Hz:7kHz, 4:1): <0.03%
- Damping Factor: 200
- Speaker Impedance: 4Ω minimum
- Input Sensitivity: Unbalanced (RCA): 1.85V, Balanced (XLR): 3V
- Input Impedance: Unbalanced (RCA): 12.5kΩ, Balanced (XLR): 100kΩ
- Frequency Response: 41 Hz - 30 kHz
- Average Impedance: 6 Ω
- Minimum Impedance: 3.7 Ω
- Recommended Power: 25 - 200 W
- Distortion (120 Hz - 20 kHz): 0.2 %
- Crossover Frequency: 2.5 kHz
- Mid Bass / Driver: 2 x 165 mm
- High Frequency Unit: 28 mm
- Size (W x H x D): 400 x 1150 x 350 mm
- Weight: 42 kg