A refined way to experience music. The Eversolo DAC-R8 is a fully balanced desktop R2R DAC, preamplifier and headphone amplifier built around Eversolo's in-house OriginR2R architecture, a discrete 5+20-bit resistor ladder driven by an FPGA, with selectable NOS, OS and BEST modes. 10MHz OCXO clock, custom O-core linear power supply, balanced stepped R2R analogue volume control, USB and I2S up to PCM 768kHz/32-bit and DSD512, balanced XLR and RCA outputs, HDMI ARC, and a built-in headphone amplifier. THD+N below 0.000316% and 130dB SNR.
Conversion Without a Chip
Most DACs are built around a ready-made converter chip. The DAC-R8 is not. Eversolo designed its own resistor ladder, called OriginR2R, so that digital processing, conversion and analogue output are engineered together as one system, without the constraints of an off-the-shelf part.
It is a fully differential 5+20-bit discrete resistor ladder driven by an FPGA. The positive and negative paths are separated from the first resistor network onward, and an FPGA handles filtering, clock management and the R2R bitstream processing. Precision resistor matching and a carefully designed analogue path give THD+N below 0.000316% (–110dB) at the XLR output, with SNR and dynamic range both reaching 130dB.
Three Ways to Listen — NOS, OS and BEST
Conversion modes are selectable from the front-panel screen:
-
NOS (non-oversampling) for the most direct presentation
-
OS (oversampling at 2×, 4× or 8×)
-
BEST, which sits between the two
Six FIR digital filters run on the FPGA, along with a bypass option, so you can tune the sound to your system and your taste. DSD has its own dedicated 1-bit path, which feeds pulse-density data directly to the resistor matrix with fewer intermediate conversion stages.
True R2R Analogue Volume Control
The DAC-R8 is a preamplifier as well as a DAC. Its fully balanced stepped R2R volume control uses a relay-switched network of precision resistors and works entirely in the analogue domain, so low listening levels keep their detail and dynamics rather than losing digital bits. It means the DAC-R8 can drive a power amplifier or active speakers directly, with no separate preamplifier. Balanced XLR and RCA analogue inputs let you add another source as well.
Timing First — 10MHz OCXO and PLL
Digital audio depends on accurate timing. The DAC-R8 uses Eversolo's in-house 10MHz OCXO (oven-controlled crystal oscillator) with a PLL, which combines very low phase noise with excellent frequency stability. A 10/25MHz external clock input accepts a master clock such as the Eversolo C10, for those who want to take timing further.
Clean Power and a Quiet Analogue Stage
A custom O-core transformer linear power supply feeds the DAC-R8, and the analogue stage uses OPA1612 output buffers. The result is a quiet background that lets the detail in the music come through.
Driver-Free DSP in Your Browser
When connected to a computer over USB, the DAC-R8 can be tuned from a web page, with no driver to install. The Eversolo AuralEngine USB interface supports a 20-band EQ, FIR filters of up to 8192 taps, and per-channel delay, giving you detailed control over the sound when you want it.
Connect Everything
The DAC-R8 is equipped for a wide range of sources:
- USB-B and I2S, up to PCM 768kHz/32-bit and DSD512
- AES/EBU and coaxial (electrically isolated)
- Optical
- HDMI ARC, for TV audio
- Bluetooth 5.4 (Qualcomm QCC3095 chipset)
- Balanced XLR and RCA analogue inputs
Outputs are balanced XLR (5Vrms) and RCA (2.5Vrms) preamplifier outputs, plus a headphone output. A 12V trigger input and output let the DAC-R8 power on and off with the rest of your system.
A Built-In Headphone Amplifier
A 6.35mm headphone output with dedicated drive circuitry has three gain settings and automatic impedance detection, supporting headphones from 16 to 300 ohms. At high gain it delivers 1W into 16Ω and 32Ω, and 0.16W into 300Ω.
Easy Control
Operate the DAC-R8 from the front-panel touchscreen, the rotary knob, the included remote control, or the Eversolo app.
Made to Match the Eversolo T8
The DAC-R8 is a self-contained component, but it was designed to sit naturally alongside the Eversolo T8 streaming transport, and it works with the Eversolo C10 master clock for a complete digital front end.
Feature Cards
🧮 OriginR2R — In-House 5+20-Bit Resistor Ladder
A discrete, FPGA-driven, fully differential R2R ladder designed by Eversolo, with no off-the-shelf DAC chip. THD+N below 0.000316% and 130dB SNR.
🎛️ NOS, OS & BEST Modes — Six FIR Filters
Choose your sound from the front-panel screen, with oversampling at 2×, 4× or 8×, FIR filter options and a bypass. Dedicated 1-bit DSD path.
🔊 Balanced Stepped R2R Volume — Drive Your Amp Directly
Relay-switched precision resistors work in the analogue domain, so the DAC-R8 can feed a power amplifier or active speakers with no separate preamp.
🎧 Headphone Amp + 10MHz OCXO + External Clock Input
Three-gain 6.35mm headphone output for 16 to 300Ω, an in-house 10MHz OCXO with PLL, and a 10/25MHz clock input for a master clock like the C10.
Editorial Blockquote
"A refined way to experience music." — Eversolo
At-a-Glance Bullets
- R2R DAC, preamplifier and headphone amplifier
- DAC architecture: OriginR2R discrete resistor ladder — FPGA-driven, 5+20-bit, fully differential
- Conversion modes: NOS / OS (2×, 4×, 8×) / BEST
- Six FIR digital filters plus bypass
- Native decoding via USB and I2S: PCM up to 768kHz/32-bit, DSD512 (dedicated 1-bit DSD path)
- THD+N: below 0.000316% (–110dB) at XLR — SNR and DNR: 130dB
- Fully balanced stepped R2R analogue volume control (relay-switched)
- Clock: in-house 10MHz OCXO with PLL — 10/25MHz external clock input (50Ω)
- Custom O-core linear power supply
- Output buffer: OPA1612
- Inputs: USB-B, I2S, AES/EBU, coaxial, optical, HDMI ARC, Bluetooth 5.4, balanced XLR, RCA
- Outputs: balanced XLR (5Vrms), RCA (2.5Vrms), 6.35mm headphone
- Headphone amplifier: 3 gain settings, 16–300Ω, automatic impedance detection
- 12V trigger input and output
- Driver-free web DSP tuning via USB: 20-band EQ, FIR up to 8192 taps, per-channel delay
- Control: touchscreen, rotary knob, remote control, Eversolo app
- Includes remote control, power cable, trigger cable and user manual
- Weight: 4kg
Specifications
DAC & Conversion
| Specification |
Detail |
| Type |
R2R DAC, preamplifier and headphone amplifier |
| DAC Architecture |
OriginR2R discrete resistor ladder — FPGA-driven, 5+20-bit, fully differential |
| Conversion Modes |
NOS / OS (2×, 4×, 8×) / BEST |
| Digital Filters |
FIR on the FPGA — six modes plus bypass |
| Native Decoding (USB and I2S) |
PCM up to 768kHz/32-bit, DSD512 — dedicated 1-bit DSD path |
| THD+N (XLR, 1kHz) |
Below 0.000316% (–110dB) |
| THD+N (RCA, 1kHz) |
0.000355% (–109dB) |
| SNR / DNR |
130dB |
Clock, Power & Analogue Stage
| Specification |
Detail |
| Clock |
10MHz OCXO with PLL |
| External Clock Input |
10 / 25MHz (50Ω) |
| Power Supply |
Custom O-core linear |
| Output Buffer |
OPA1612 |
| Volume Control |
Fully balanced stepped R2R, relay-switched, analogue domain |
Inputs
| Specification |
Detail |
| Digital |
USB-B, I2S, AES/EBU (isolated), coaxial (isolated), optical, HDMI ARC |
| Wireless |
Bluetooth 5.4 (Qualcomm QCC3095) |
| Analogue |
Balanced XLR, RCA |
| Clock |
10/25MHz external clock input |
| Trigger |
12V input |
Outputs
| Specification |
Detail |
| Preamplifier Outputs |
Balanced XLR (5Vrms), RCA (2.5Vrms) |
| Headphone Output |
6.35mm — 3 gain settings, 16–300Ω, automatic impedance detection |
| Headphone Power (High Gain) |
1W (16Ω / 32Ω), 0.16W (300Ω) |
| Trigger |
12V output |
DSP & Control
| Specification |
Detail |
| Web DSP (over USB, no driver) |
20-band EQ, FIR filters up to 8192 taps, per-channel delay |
| USB Interface |
Eversolo AuralEngine |
| Control |
Touchscreen, rotary knob, remote control, Eversolo app |
General
| Specification |
Detail |
| Display |
5.2-inch front touchscreen |
| Dimensions (W × D × H) |
315 × 230 × 75mm (including feet) / 65mm (excluding feet) |
| Weight |
4kg (5.9kg packed) |
| In the Box |
Remote control, power cable, trigger cable, user manual |
Closing Quote
"Conversion built from the resistor up. The Eversolo DAC-R8 — your DAC, preamplifier and headphone amplifier in one balanced, in-house design."